Sinker EDM Tooling

Chuck adapter for Macro holders in the WEDM system.  Supplied with drawbar 3R-605.5RS. Fixed index positions 4x90º. Clamping force 6000 N. Weight 1.9 kg.

For manual mounting of Unimatic holders and Unimatic clamping elements in the Macro system. Adjusting pallet with dovetail guide adaptation. Adjustment range ±0.2 mm f...

Chuck for Macro holder. For permanent mounting on the machine spindle or fixure. Required drawbar 3R-605.1RS Clamping force 6000 N Fixed index positions 4x90° Weight 2...

To convert 3R-600.24-S to enable long drawbar 3R-605.1.

 Splash guard for Macro chucks with long drawbar. Can also be used as a cover for unused chucks.Note: Does not work with sealing ring 3R-612.116.

Splash guard for Macro chucks with long drawbar. Can also be used as a cover for unused chucks.Note: Does not work with sealing ring 3R-612.116.

With transformer (110/220V) for integral lighting. Magnification x25 Field of view Ø6 mm Weight 0.8 kg.

Maximal pressure 20 ton. Required drawbar 3R-605.11 Weight 1 kg.

System 3R 3R-600.17-20, Pneumatic chuck, Macro PM Shipped and sold by System 3R

System 3R 3R-600.27-50, Manual chuck Ø75, Macro PM Shipped and sold by System 3R

System 3R 3R-600.17-50, Pneumatic chuck, Macro PM Shipped and sold by System 3R

With 4 drawbars Material: steel, ground Pallet dimensions: 450 x 42 x 450 mm  Pallet type C282740 / C282750 Centre distance: 200 and 250 mm 4 drawbars including in sco...

 Chuck adapter with built-in pneumatic MacroCombi chuck for mounting in 90356.10 or 90576.05.

Chuck adapter with built-in pneumatic Macro Magnum chuck for mounting in C 219 800. Built-up height 80 mm X/Y-centring with springy cams, hardened, stainless Adapted f...

 Pneumatic chuck with through holes Ø110 mm. Required air pressure 6 ±1 bar Fixed index positions 4x90° Air-blast cleaning of the Z-references Weight 22 kg.

 Pneumatic vibration-damped chuck. Required air pressure 6 ±1 bar Fixed index positions 4x90º Air-blast cleaning of the Z-references

  Pneumatic chuck with coarse guiding of the pallet.Intended for permanent building-in. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6 ±1 bar Fixed ind...

Two ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.1 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct W...

Pneumatic added-on chuck with swivel surrounding unit. For low RPM Machine adapted.

Intended for MacroCombi chucks. Can also be used as a cover for unused chucks.

Magnification x25. Field of view Ø Weight 0.6 kg.

For small electrodes Ø1-4 mm, maximum height 30 mm.Supplied in sets of 5.

Upper and lower faces ground parallel within 0.002 mm. Locating pin Ø8.8 mm (0/0.05 mm). Not intended for automatic changing Supplied singly.

Pneumatic chuck for mounting on machine spindle with 3R-A3620. Required drawbar for Macro holder 3R-405.16 Required drawbar for MacroJunior holder 3R-405.11 Required a...

Pneumatic chuck for mounting directly on the machine spindle. MacroJunior references offset 90°. All X/Y/Z references in hardened and ground steel.Note: When ordering ...